Journal of Guangxi Normal University(Natural Science Edition) ›› 2017, Vol. 35 ›› Issue (2): 17-23.doi: 10.16088/j.issn.1001-6600.2017.02.003

Previous Articles     Next Articles

The Design of a Piecewise Compensated Bandgap Voltage Reference

WANG Jun, WEI Duqu*   

  1. College of Electronic Engineering, Guangxi Normal University, Guilin Guangxi 541004, China
  • Online:2017-07-25 Published:2018-07-25

PDF (PC)

186

Abstract: For first-order temperature compensation of the reference voltage source is still high temperature coefficient, this paper proposes a design method of piecewise compensation to reduce the temperature drift. A voltage signal following the temperature variation is produced by an amplifier with negative resistance of which gain is sensitive to temperature. Drived by this voltage signal, a PMOS transistor is used to inject or extract electricity current for the reference circuit in three temperature segments as a pattern of piecewise compensation. The simulation results indicate that the reference voltage of circuit only change 0.311 mV and its temperature coefficient is 1.89×10-6 ℃-1 in the temperature range(TR) from -40 ℃ to 125 ℃. Its PSRR is -90 dB at low frequency. When the temperature of the bandgap reference voltage source is at -15 ℃, 34 ℃ and 76 ℃, the curvature of the reference voltage to the temperature is 0, and the temperature drift coefficient is lower in the standard process. The study can provide a high precision voltage reference for ADC, linear voltage regulator and DC/DC converter circuit.

Key words: temperature coefficient, bandgap reference, PSRR, piecewise compensation

CLC Number: 

  • TN432
[1] 朱晓宇,居水荣.一种应用于ADC带曲率补偿的高精度带隙基准[J].现代电子技术,2015,38(2):129-131.
[2] 蔡超波,凡东东,宋树祥,等.一款带POR的可校正低功耗电压基准源[J].广西师范大学学报(自然科学报),2016,34(1):26-31.
[3] IVAOV V,BREDERLOW R,GERBER J. An ultra low power bandgap operational at supply from 0.75 V[J]. IEEE Journal of Solid-State Circuits, 2012,47(7):1515-1523.
[4] MAGNELI L, CRUPI F, CORSONELLO P,et al. A 2.6 nW,0.45 V temperature-compensated subthreshild CMOS voltage feference[J]. IEEE Journal of Solid-State Circuits, 2011,46(2):465-474.
[5] 姜树法,张国俊.分段温度曲率补偿双极工艺带隙基准设计[J]. 微电子学与计算机,2013,30(4):76-78.
[6] 梁希,刘文平,刘智.一种高阶曲率补偿带隙基准的原理与实现[J].微电子学与计算机,2012,29(10):117-120.
[7] 毛伟,张波.一种新型指数曲率补偿带隙基准源[J].微电子学,2006,36(4):495-497.
[8] 毕查德·拉扎维.模拟CMOS集成电路设计[M].陈贵灿,程军,张瑞智,译.西安:西安交通大学出版社,2003.
[9] 凡东东,宋树祥,蒋品群,等. 新型高增益CMOS跨导运算放大器[J].广西师范大学学报(自然科学版),2014,32(4):6-9.
[10] ANDREOU C M, KOUDOUNAS S, GEORGIOU J. A novel wide-temperatrue-range 3.9 ppm/℃ CMOS bandgap reference circuit[J]. IEEE Journal of Solid-State Circuits,2012,47(2):574-581.
[11] MING Xin, MA Yingqian, ZHOU Zekun, et al. A high precision compensated CMOS bandgap voltage reference without resistors[J]. IEEE Trans Circ Syst, 2010,57(10):767-771.
[12] CHEN Jianghua, NI Xuewen, MO Bangxian. A curvature compensated CMOS bandgap voltage reference for high precision applicaitons[C]// Proceeding of the 7th Int Conf ASIC. Piscataway, NJ:IEEE Press, 2007:490-493.
[13] GE Guang, ZHANG Cheng, HOOGZAAD G, et al. A single-trim CMOS bandgap reference with a3σ inaccuracy of ±0.15% from -40℃ to 125℃[J]. IEEE Journal of Solid-State Circuits,2011, 46(11):2693-2701.
[1] LIAN Tianpei,JIANG Pinqun,SONG Shuxiang,CAI Chaobo,PANG Zhongqiu. Design of a Bandgap Reference with Low Temperature Coefficient High PSRR and Wide Band [J]. Journal of Guangxi Normal University(Natural Science Edition), 2019, 37(1): 125-132.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Guangxi Normal University(Natural Science Edition), All Rights Reserved.
Tel: 0773-5857325　E-mail: gxsdzkb@mailbox.gxnu.edu.cn
Powered by Beijing Magtech Co. Ltd